Silicon Hose Tubing Food Grade 19mm x 25.4mm (Per Foot)

1611030005
Out of stock
4.44
You will earn 4 points with this purchase
Item is out of stock. Check in a week or so when new stock arrives.

Product description

Top quality certified platinum cured silicone tubing for pharmaceutical, laboratory, bioprocess manufacturing and food and beverage applications.

Range from 4mm to 25mm internal diameter, designed so that each fits snugly into the next one up (i.e. the OD of each is the ID of the next in the range). So you can join them together to connect tubing of different diameters. Contact us for food grade silicon gel if you want to make permanent connections between tubing sections.

Silicone tubing in platinum cured translucent is designed for a variety of pump and transfer applications including pharmaceutical, laboratory, bioprocess manufacturing and food and beverage applications. The tubes are able to withstand a high temperature of 200°C (intermittent) and are available in various internal diameters and wall thickness. Our range in translucent platinum cured silicone (non-yellowing) is available from 4mm to 25mm internal diameter.

Platinum cured Silicone has a number of advantages over conventional peroxide cured Silicones including:

    Non Yellowing
    No Peroxide by-products
    High tear strength as standard
    High gloss finish
    Excellent clarity
    Highly hydrophobic
    Extended life in Peristaltic pumps
    Platinum cured Silicone has WRAS approval for hot and cold drinking water and is FDA approved.


Advantages for silicone tubing

    Excellent biocompatibility
    No taste imparted to transported fluids
    Extremely good over a wide range of temperatures
    Weather, ozone, corona and radiation resistant
    FDA 21 CFR 177.2600 classified


Disadvantages for silicone tubing

    Not suitable for use with concentrated acids and bases, organic solvents or oils
    Relatively high gas permeability


Colour     Translucent
Material     Silicone (VMQ)
Hardness (Shore A)     60
Maximum Temperature (°C)     200
Minimum Temperature (°C)     -40
Density (g/cm³)     1.2
Elongation at break (%)     490
Tensile Strength (MPa)     11
Code 1611030005

Customer reviews

Be the first to review this product Write a review