SN Pale Ale Clone 20 Litres 5.3% ABV All Grain
€22.94
SN Pale Ale Clone 20 Litres 5.3% ABV All Grain
A fabulous clone of the world's best known craft pale ale
IBU: 37A fabulous clone of the world's best known craft pale ale
EBC: 20
Target Original Gravity: 1.052
Target Final Gravity: 1.011
Target ABV: 5.3 %
Ingredients:
- malted barley (5.2 Kg)
- hop pellets (101 grams approx) or equivalent leaf if pellets unavailable, adjusted for alpha values
- dried brewing yeast (US-05)
- Irish moss
- priming sugar (131 grams dextrose)
Allergen Declaration: Cereals Containing Gluten
Instructions:
Please read all the instructions, including the Notes below, before starting your brew.
- heat 13.5 litres of water to 72 oC
- crush grains and add to water
- mash at 68 oC for 60 minutes
- add boiling water to raise grain bed to 76 oC
- hold for 5 minutes
- recirculate until wort is clear (about 20 minutes)
- sparge with hot water to maintain grain bed at 77 oC
- collect 26 litres of wort and boil for 90 minutes
- add hop pack A 60 minutes before end of boil
- add hop pack B 15 minutes before end of boil
- add Irish moss 15 minutes before end of boil
- add hop pack C at end of boil
- cool wort and transfer to fermenter
- aerate wort and pitch yeast
- ferment at 20 oC
- rack to secondary when fermentation is complete and add hop pack D (dry hop)
- bottle when beer clears
Note 1: Hops should be placed in our fine mesh nylon drawstring bags and then added to the wort.
Note 2: After cooling the wort, remove the hop bags and and stir the wort vigorously in a circular motion for a minute to create a whirlpool (this will cause any particles to gather in the centre of the boiler). Wait a few minutes until the whirlpool stops and then gently transfer the wort into your fermenter, avoiding the remaining hops if possible. Its good to splash it about as it goes into the fermenter since adding air (oxygen) at this stage is good for the yeast.
Product Code:
1502170007