Starsan HB 236 ml

Out of stock
Read 1 review
You will earn 17 points with this purchase
Item is out of stock. Check in a week or so when new stock arrives.

Product description


Also available in packages of 236 ml, 473 ml, 946 ml and 3.78 litres. Order the product with user manual in the language of your choice, see links below.

A high foaming, final acid anionic rinse for use in the beverage and food industries.

  • Leaves tanks and equipment spotless and avoids mineral build-up
  • Not affected by organic soils
  • Only 60 sec. contact time needed!
  • Do not use on soft metals nor in CIP systems
  • Dosage: 15 - 25 ml  / 10 litres of water
  • User manual in Dutch & French

Directions for use: use as a final rinse. Prior to application; remove gross food particles nd soil by pre-flush or pre-scrape and, when necessary, pre-soak. Then thoroughly wash or flush objects with a good detergent, followed by potable water. Prepare a solution of 15 - 25 ml Star San HB™ per 10 L of water ( 1 oz/5 gal to 1 oz/3 gal). Apply on surface with a cloth, mop, sponge, spray or by immersion. Spray 15-20 cm (6-8 inches) from surface and rub with a brush, cloth or sponge (cover or remove all food products). The surface must remain wet for at least 1 minute. Let air dry afterwards. Close the packaging tightly after use and store in a well-ventilated place.
Keep out of reach of children.
DO NOT MIX STAR SAN HB™ with chlorinated cleaners as chlorine gas will result.

Code 1312060226

Customer reviews

5 stars based on 1 review
Seamus Collins
from Drogheda

Just right

This sanitizer is perfect for home brewing, no more waiting 10mins for the solution to work, then ages rinsing it off, Star San works with 60sc contact.

Write a review